Fiberglass wallpapers are a strong and persistent stylish decorative coating. This material is obtained from natural raw materials, differs from synthetic materials in that it is not harmful to human health. If the walls in your house have minor defects, your choice should stop on glass wallpaper. Surprisingly, the pasting of such wallpaper with your own hands is the task is relatively simple.
How to glue glass wallpaper.
We prepare the walls. If your old coating does not crumble and does not exfoliate, then you can not touch it. If reliability is still weak, then it will better get rid of the old coating. We put the peeled walls with the peeled walls. On large cracks and joints of the plates, we apply a painting grid (sickle), polish and clean it from dust. Next, we primer the walls with a weak solution of glue or a special tool, pre -purchased in the store.
When choosing glue for glass wallpaper, pay attention to some features of application – not every glue is suitable for such wallpapers. Glue for glass wallpaper Oscar is the most suitable option!
Recommendations for gluing glass, in principle, do not differ from the overall technology of pasting any other wallpaper. A suitable temperature at which it is best to stick wallpaper fluctuates – +10 … +25 ° C.
The most harmful influences for freshly glued glass wallpaper are direct sunlight and drafts. Failure to fulfill these recommendations leads to the fact that the wallpaper is peeled off, immediately or after a while.
A characteristic feature of glass wallpaper – rolls are wound inside the front side, and the wrong side can be marked with a gray strip. With a sharp knife, expand the canvas roll in height of your wall with a allowance of about 10 cm. In addition, in the process of gluing textured glass -wallpaper without an image, a violation of the orientation of paintings is not a disaster, the finished coating will save the secret of your error.
Before proceeding with the gluing layout process, the glue should be applied to the wall, a little more than to the width of the wallpaper.
A strip of glue applied for 1 time, there should not be more than the width of the canvas more than half.
It is better to start the process of pasting the wallpaper from the door, angle or window. To arrange a shell strictly helps to arrange a plumb line. We cut the edges of the wallpaper according to the picture, and the next canvas is placed on the previous one. We press the wallpaper of the wallpaper against the wall using a plastic spatula. The joints of the paintings are smoothed in the last turn, at the same time, pressing both canvases.
The joints must be quickly cleaned from the spoke residues with a sponge or a wet clean rag. The edge of the spatula should not touch the junction of glass wallpaper. Allowances can be cut after fixing the canvas on the wall.
24-48 hours after gluing, many prefer to paint glass wallpaper. To do this, we primer the surface with diluted wallpaper glue. We stain dried surfaces in 2-time receptions with an interval of at least 12 hours. The paint should lie evenly, in a small layer and completely overlap the existing color.
in
