To protect the supporting walls of the house from damage, according to construction technique, they are insulated from the side of the street. Insulation will help ensure the safety of the walls from condensate, moisture, high and low temperatures. But, starting to work, you may encounter the problem of choice. How and how to fix insulation? Everyone wants the method of fastening to be simple, safe, but at the same time could ensure durability and quality.
There are several common methods on how to fix the material of thermal insulation. The first fame method is dowel for mounting insulation. If you are going to fasten the foam, various types of mineral wool slabs, then this method will suit you great. A little more problematic to work with dowels mounting if the material of the roll.
There is also a more universal way of fastening insulation. This is a heat -insulation glue mount. The modern construction market has many adhesives from different manufacturers, for example, thermobond, Weber. Therm “,” ISOFIX “.
The glue on sale is presented in the form of dry powder, which is packaged in twenty -five kilogram bags. For use, the glue is diluted with water in proportions, according to the recommendations of the manufacturer.
The positive aspects of the use of glue include convenience, because even if the temperature is not a large decrease, it is easy to work with glue, the availability of choice for sale, as well as mandatory security for human health and ecology. In addition, glue for thermal insulation materials perfectly tolerates about a hundred freezing cycles. But the main advantage is universality. The glue reliably attaches thermal insulation to any surface – concrete, aerated concrete, foam concrete, brick and even to surfaces with lime plaster.
Before performing work, it is necessary to clean the work surface with a metal brush with a metal brush. After that, apply a gearing solution with a solution of glue with a continuous strip to the surface, if it is with a slight inequality. But if the inequality of the surface reaches 10 mm, then we also process thermal insulation material.
In the case when the surface of the surface reaches 20 mm, the adhesive solution must be applied to thermal insulation according to the principle of “beacons”. That is, if we have a stove, suppose, has size 0.5×1 m, then we make 6-8 beacons about 10-15 mm in diameter. We use such an amount of adhesive mixture that at least 60% of the surface of the stove is covered with at least 60%. Then, with an increase, we press thermal insulation to the working surface. We try to place the edges of the slabs as close as possible to each other, and remove the remaining glue. It is advisable to insure yourself and after 48 hours to mechanically fix the slabs. You can apply a protective layer using the Siltek T-87 mixture
The cost of glue depending on the manufacturer changes from 350 to 800 rubles.
Everyone chooses the method of fastening thermal insulation himself. The main thing is to choose what with minimal labor costs will give a high -quality and durable result – heat in your house.
