The fungus appears and begins to spread in rooms where humidity is above 70 and the temperature is not lower than 150C. Closed or poorly ventilated room – also fertile ground for the formation of fungal disputes.
The main rule is how to get rid of the fungus in the bathroom – to act to defeat, half measures and general cleaning will not help.
Stage 1 – artillery
The fungus should be fought largely and global. Inspect the bathroom. Find the hearth and causes of the fungus. With powerful hairdries, heaters, fans, warm the air – it is necessary to reduce humidity. Direct the streams of hot air to the foci of fungal formations.
It is possible that you will have to tear off the cladding of walls, ceilings, and floor, so that drying is as effective as possible. Previously purchase a special antifungal agent and spray it in the room to kill disputes in the air.
Stage 2 – Battle to complete victory
Copper sulfate – an effective, inexpensive tool that is quite simple in use. A solution of copper sulfate – 0.1 kg per 10l. water. However, its disadvantage is toxicity. Apply the drug, observing safety measures: respirator or wet mask, gloves, after processing, thoroughly washing surfaces.
Diluted chlorine powder and chlorine -based bleach. A significant minus is a caustic smell, it is recommended to arm with gloves and a mask.
Oil-based antiseptic agents, and on the basis of turpentine or white spirit. Excellently remove fungi, but leave a persistent unpleasant odor.
Mixtures and solutions made in industrial conditions. Chemical facilities for business purposes took care and created the means of combating the fungus. When buying such a solution, you should consult, since ready -made drugs are narrowly specialized. The fungus on the ceiling and fungus on the walls or floor are destroyed by different solutions. See the package where it should be indicated: the product destroys mold, and is not used for prevention.
– For 2 cups of warm water 1 tablespoon of tea tree essential oil. Applied with a spray. No need to wash off. It is desirable to carry out the procedure at night.
Baking soda that must be extinguished with vinegar. Pour a large amount of soda on the surface affected by the fungus, and pour 70 vinegar on top. After the reaction (foam should settled) rinse the surface with a soap solution. The method is convenient exclusively on horizontal planes.
Mix 1 part of hydrogen peroxide, water, vinegar, boric acid. Wipe the affected surfaces.
Antrazen oil perfectly kills the fungus, but has an unpleasant and caustic smell. Apply oil to the affected surface on 2 layers. After using the product, the room should be carefully ventilated.
In 2.5l. warm water dissolve a glass of drill. Clean the surface, apply the solution with a painting brush. Remove excess moisture with a dry cloth.
If the fungus has just begun to appear, then the campaire balls that should be laid out in the room will help. You can dilute iodine and arrange on the bathroom, but if large areas are affected by the fungus, then this method is not a little.
Stage 3 – fix the result
So that the fungus does not return to the bathroom, follow the rules:
Air humidity in the room is 60 and no more.
Ventilate, put forced ventilation.
Put a good heated towel rail.
Leave the door to the open at night.