Good day, dear readers. Today we’ll talk about how to do your own siding lining at home. We all perfectly understand that the insulation of the outer wall of the house will not only save heating costs, but also make the interior of the interior more comfortable. Since it will be warm in winter, and in the summer you can enjoy the coolness of the house. The greatest effect is given by comprehensive insulation, when gender, roof, front door are insulated simultaneously with the walls. By the way, insulation of the outer wall, not internal, will save useful space.
Different insulation materials are used for outdoor insulation, including mineral wool, roll or tile glass wool, polystyrene foam.
It is necessary to check the tightness of the walls and, if necessary, to packet of the existing cracks and cracks. For these purposes, packages or mounting foam are used.
Only after preliminary work is a bar crate is installed. The width of the opening between the bars should correspond to the width of the insulation.
The sequence of work is as follows:
1) laying a vapor barrier layer;
2) laying the insulation in the direction from the bottom up and its subsequent fixing (special dowels are used);
3) the installation of a waterproofing membrane (a construction stapler is used);
4) installation of the frame for installing facing material.
Facing material can be used. Between the waterproofing layer and the finish lining, it is necessary to leave a small (2-4 cm) airspace.
Insulation of the outer wall of the brick house
Warming material can be chosen the same as when warming the outer wall of a wooden house. But the crate is best made of metal profile.
Insulation of the outer wall of a brick house can also be a multilayer system consisting of vapor barrier, thermal insulation, waterproofing and cladding.
Distinctive features of insulation of a brick house are the possibility of attaching polystyrene insulation foam directly to the wall by means of special glue without building a crate. The finish can be plaster or paintwork, only preliminarily you need to make an additional plaster layer using a fiberglass mesh.
A similar method of insulation is not suitable for wooden houses, since the dense layer of plaster does not allow the tree to breathe and the process of decay of wooden material begins from this.
Another way of insulation of the outer wall of the brick house is intersthenium insulation and its accompanying well masonry. For this method, you can use the same foam with moisture resistance, or just pour a liquid heat insulator between the walls, which after solidification will gain a solid shape.
If the insulation of the outer wall of the house did not give its effect, then it is necessary to conduct complex insulation, including the floor, roof, doors, or to repair the heating system.
