The process of plaster walls and ceiling is simple. But to add bright original colors to the room and give it a modern look, you can use designer plaster.
Textured plaster on the ceiling allows you to create various relief drawings.
Preparation for plaster.
Before plaster, it is necessary to prepare the room, covering furniture items and protecting them from dirt and dust.
Apply a primer to the place of coating to prepare the surface of the ceiling. The primer will eliminate ceiling defects – cracks and holes.
To do this, it is better to use:
Application of plaster with a roller.
To do this, you need to purchase a painting roller. Textured paint or a thinned solution of drywall is applied to the roller and the surface of the ceiling is lubricated.
Important: it is necessary to ensure that small lumps do not form in the process of painting.
Application of plaster with a spray
Sprayer is the fastest and most convenient way of plaster. Direct the nozzle with a spray solution to the ceiling and start the plaster process.
Important: Decorating the ceiling can start after good drying the plaster layer.
Application of textured plaster.
For decorating the ceiling, special textured plaster of dry shape is used. It is bred in the water until a thick composition is obtained.
A well -mixed prepared layer of plaster is applied with a spatula to the surface of the ceiling with stripes, from one corner to the other in a semi -perimeter. On the wet layer of plaster, a pattern is made using a embossed roller, a triangular narrow shape or brush that has a hard pile.
Attention: you need to make patterns very quickly, while the plaster layer remains wet.
3. The second strip of plaster layer is applied, after which a pattern is made on it.
It is recommended: During the period of operation to turn off the heating equipment, close the windows and windows.
To create a textured effect, it is necessary to carry out a roller that has a long pile along the wet layer of plaster, and perform circular movements along the ceiling surface in various directions with a triangular spatula or brush. So you can create a pattern in the form of circles or under a tree.
Applying a plastic grater and performing progressive movements on the ceiling, you can create a drawing in the form of direct grooves.
Tip: deep reliefs can be smoothed with a spatula.
You can make a more spectacular and original pattern: the central part of the ceiling fraudulently dash, and stick wallpaper on the remaining surface.
What you need to know about plaster:
The process of drying of plaster material depends on its type. For decorative coating, this period is at least 7 days.
After the textured plaster completely dry, the ceiling can be varnished or paint to give a spectacular look.
To give the plaster a certain shade, you can add a little paint to the material.