The roof for industrial facilities is made of durable materials with high guido – and thermal insulation, resistance to external and internal loads (snow weight, wind gusts; mass of suspension equipment). The equipment of the industrial roof is intended not only for the external protection of buildings and structures from the spring environmental influences, but also performs a number of additional functions: strengthening the supporting parts of the structure and durability of operation.
Industrial roofs in Orel are installed from a wide range of roofing materials with specified technical characteristics according to operating conditions. The roofs have two design options – attic and unra -shallow. Large roof areas for industrial buildings require the performance of a flat roof design to remove a large amount of precipitation, mounted under a slight slope. Nonal technology for erecting industrial roofs is used in attic structures mounted by load-bearing elements (stoplings, large blocks of panels) and an angular inclination of 30-70 °.
The following materials are used to install industrial roofs:
salary materials (bitumen);
mastic materials;
corrugated board.
The melted roof installation technology is based on the use of bitumen materials made of fiberglass and synthetic components (for example, polyester). The roof of this type provides strength and 100 tightness of the upper part of the building, water resistance, resistance to mechanical deformations and a long service life. The roof installation by melted technology is carried out only on a flat surface with a small slope (no more than 20 °.)
Mastic materials are more stable compared to roller bitumen. They are used for fastening on metal surfaces and concrete. Roofs covered with liquid mastic, wear-resistant, are reliably protected from UV radiation, are not subject to corrosion.
Corrugated board, consisting of wavy sheets of galvanized steel, is used to manufacture inclined roofs of industrial buildings. The roof from corrugated board has a slight weight, resistant to temperature changes, does not require increased rafter structure. The disadvantages of this type of roof are low sound insulation, exposure to corrosion, the need for frequent roof repair.
Roof repair in Orel eliminates local damage and includes major repairs of the roof in a short time. In this case, the type of roofing does not matter. Experienced highly qualified specialists will qualitatively and without a problem perform any amount of work using the most modern repair technologies, which will quickly eliminate the most complex damage to the industrial roof. The cost of repairs directly depends on the complexity, volume and terms of work.
.
